Specifications:
1) Models: 1K/1K(S), 2K/2K(S), 3K/3K(S)
2) Load criterion: 1000VA/700W, 2000VA/1400W, 3000VA/2100W
4) Standard voltage: 220VA
5) Standard frequency: 50
6) Voltage (single-phase) range:
a) (118+5 ~ 300?5) VAC Load<50%
b) (140?5 ~ 300?50 VAC 50%?üLoad<70%
c) (140?5 ~ 300?5) VAC Load?Y70%
7) Frequency range: 40 ~ 60Hz (adjustable)
8) Power factor: ?Y0.95, ?Y0.97, ?Y0.97
9) Voltage factor: 220VAC ? 2%
10) Degree of distortion(full load):
a) Linear load : ?ü3%, ?ü4%, ?ü4%
b) Nonlinear load: ?ü6%, ?ü7%, ?ü7%
11) Overload capacity:
a) When load is larger than 150%, by-pass will occur after putting
into load for 200 milliseconds
b) When load is larger than 110%, by-pass will occur after working for
30 seconds
12) Load peak ratio: 3:1 (max)
13) Battery standard voltage: 36VDC, 96VDC, 96VDC
14) Back up time: (minute)
a) Full load: 6, 9.5, 7.5
b) Half load: 14, 21, 17.5
15) Changeover time: ?ü4 (millisecond)
16) Mains mode by-pass mode: ?ü4 (millisecond)
17) By-pass mode mains mode: 0 (millisecond)
18) Temperature: -20 ~ 40oC
19) Relative temperature: 0 ~ 95% no water drop forming
20) Altitude above seal level: below an elevation of 1500 meters
21) Storage temperature: -25 ~ 55
22) Dimensions (L x W x H):
a) 145 x 405 x 220mm
b) 195 x 455 x 330mm
c) 195 x 455 x 330mm
23) Gross weight: 15/9.5, 34/17, 35/18kg